Hydrocarbons occupy a vital role in our life and continue to play an important role for many more years to come. We need to follow all technological innovations to continue our productivity standards to achieve our production targets. Let us extend our vision to achieve this mission.

Sunday, January 1, 2012

Calculate Oil-Water ratio from retort data

Retort analysis is the method to extract mud components into oil, water and solid. The retort analysis report shows percentage of each component by volume. We use data from the retort analysis to determine oil water ratio.

The formulas below demonstrate how to calculate oil water ratio from retort data.

a) % oil in liquid phase = (% by volume oil x 100) ÷ (% by volume oil + % by volume water)

b) % water in liquid phase = (% by volume water x 100) ÷ (% by volume oil + % by volume water)

c) Result: The oil/water ratio equals to the percent oil in liquid phase and the percent water in liquid phase.

Example: Determine oil water ratio from following information

Data from a retort analysis:

% by volume oil = 56

% by volume water = 14

% by volume solids = 30

Solution:

a) % oil in liquid phase = (56 x 100) ÷ (56+14)

% oil in liquid phase = 80

b) % water in liquid phase = (14 x 100) ÷ (56+14)

% water in liquid phase = 20

c) According to this retort report, the oil/water ratio equals to 80/20.

Please find the excel sheet used for calculating oil water ratio from retort data.

No comments:

Post a Comment

Thanks for visiting the site and your interest in oil and gas drilling

free counters