Hydrocarbons occupy a vital role in our life and continue to play an important role for many more years to come. We need to follow all technological innovations to continue our productivity standards to achieve our production targets. Let us extend our vision to achieve this mission.

Sunday, July 1, 2012

BOP Stack Organization and BOP Stack Arrangement

Blow Out Preventor (BOP) is a very important part of well control equipment and the first thing which we would like to discuss in this article is the BOP stack organization. The BOP stack can be configured in various configurations which must be suitable for the operation.

API has the recommended component codes for BOP as listed below:

A = Annular Preventer

G = Rotating Head

R = single ram type preventer with one set of rams, blind or pipe.

Rd = double ram type preventer with two sets of rams, blind or pipe.

Rt = triple ram type preventer with three sets of rams, blind or pipe.

CH = high remotely operated connector attaching well head or preventers

CL = low pressure remotely operated connector attaching; the marine riser to the BOP

S = spool with side outlet for choke and kill lines

M = 1000 psi

How can I know the BOP configuration and rating from the codes?

When you see the code, you need to read upwards from the bottom of BOP stack. Let's take a look at the following example:

15M 13-5/8" – RSRRA

This BOP stacks has pressure rating of 15,000 psi with a bore size of 13-5/8" inch. There are following BOP component from bottom to top

Rams – Spool – Rams – Rams – Annular ( see the figure below)

 You need to keep in mind that the BOP stack is able to shut the well in and allow you to perform well control operations with the greatest flexibility. Considerations of how to arrange the BOP stack are as follows:

• The BOP stack must be suitable for the drilling operation.

• The stack should be able to serve the stripping operation not just only shut the well in.

• Pressure rating must be higher than expected surface pressure on surface when the well control situation is happened.

• Excessive BOP rams cause difficulty to handle and maintenance. Additionally, the cost of BOP stack is more expensive.

• Sour gas and temperature on surface directly affects the element in the BOP's/

• The best BOP stack arrangement is the one that is suite for the operation within safety limit.

2 comments:

  1. can i get the functions of weep hole on ram type BOP mud seals, Ram locking device, API recommendation on closing time of 13.5/8" 15k RWP Annular, 21.1/4" 5k RWP Annular, 16.3/8" 5k RWP Annular and 11" 5kRWP Ram.

    ReplyDelete
  2. AVAILABLE PETROLEUM PRODUCTS - D2, D6, JP54 & JETA1.

    WE HAVE AVAILABLE PETROLEUM PRODUCTS FROM RELIABLE REFINERY IN RUSSIAN FEDERATION WITH BEST PRICE AND QUALITY.
    BELOW PRODUCT ARE AVAILABLE WITH BEST OFFERS - FOB CI DIP AND PAY.

    JP54: Quantity: 500,000-2,000,000 Barrels
    D2: Quantity: 50,000-150,000 Metric Tons
    D6 Virgin: Quantity: 400,000,000-800,000,000 Gallon

    SERIOUS BUYERS PLEASE CONTACT US FOR MORE DETAILS WITH YOUR SPECIFIC REQUIREMENTS SO AS TO ENABLE US PROVIDE YOU WITH OUR WORKABLE PROCEDURE.
    Sincerely.

    Maksim Yaroslav (Mr.)
    EMAIL: neftegazconsultant@yandex.ru
    EMAIL: neftegazconsultant@mail.ru
    Skype: neftegazconsultant
    TEL: +7 9265036551

    ReplyDelete

Thanks for visiting the site and your interest in oil and gas drilling

free counters